Libec LX10 Professional Tripod
₨250,000.00
- Supports 35 Pounds
- Sliding Balance Plate with Safety Stop
- Fixed Counterbalance System
- Two-Step Pan and Tilt Drag System
- +85 to -65° Tilt Range
- 100mm Half Ball
- Ground-Level Spreader
17
Items sold in last 3 minutes
0
People watching this product now!
Description
Description
Libec LX10 Professional Tripod
Libec LX10 Professional Tripod system and H65B Head and Ground-Level Spreader support cameras and accessories weighing up to 11 pounds. The head and legs come with a ground-level spreader, and the system is height-adjustable from 25 to 68.5″. The aid in leveling your shot, a bubble level is incorporated into the head. The head also features a sliding baseplate that allows you to adjust the balance of your camera. It provides a fixed counterbalance that helps the fluid head support loads up to 35 pounds. With individual fluid drag adjustments for both pan and tilt. You can adjust the fluid head to suit your shooting style or the needs of the shot.
The sliding balance plate features a total of four inches of balance adjustment, two inches forward and two inches back of center. This does not take into account the integrated balance slot that allows you to adjust the position of the captive camera tie-down screw.
The head incorporates a small stud at the front that prevents the balance plate from sliding out.
The included ground-level spreader prevents the tripod’s legs from flying apart and is suitable for use on flat, level surfaces.
Specifications
Payload : 16kg (35.0lbs)
Counterbalance : FIX
Drag mode : 2STEP
Tilt angle : +85o/ -65o
Temperature range : -20oC to +60oC / -4oF to +140oF
Bubble level : Non illuminated
Camera plate : Sliding plate
Sliding range : +/-50mm (2.0 in)
Plate attachment : 3/8″ screw x 2
Spare screw : 3/8″ screw
Weight : 7.6kg (16.7lbs)
Height : 63 to 173.5cm (25.0 to 68.5 in)
Ball diameter : 100mm
Section : 2STAGE
Counterbalance : FIX
Drag mode : 2STEP
Tilt angle : +85o/ -65o
Temperature range : -20oC to +60oC / -4oF to +140oF
Bubble level : Non illuminated
Camera plate : Sliding plate
Sliding range : +/-50mm (2.0 in)
Plate attachment : 3/8″ screw x 2
Spare screw : 3/8″ screw
Weight : 7.6kg (16.7lbs)
Height : 63 to 173.5cm (25.0 to 68.5 in)
Ball diameter : 100mm
Section : 2STAGE
Reviews (0)
Related products
Canon LP-E6N Lithium-Ion Battery Pack (7.2V, 1865mAh)
₨18,000.00
- Compatible with Canon EOS 7D Mark II, 7D, 5D Mark II, 5D Mark III, 5D Mark IV, 5DS, 5DS R, 60D, 60Da, 70D, 80D, 6D, and 6D Mark II Cameras
Power your EOS DSLR Camera with this LP-E6N Lithium-Ion Battery Pack from Canon. It is compatible with the LC-E6 and LC-E6E chargers and offers a capacity of 1865mAh with an output voltage of 7.2V. The battery is supplied with select cameras and is offered here as a spare or replacement part.
Canon LP-E6NH Lithium-Ion Battery (7.2V, 2130mAh)
₨32,000.00
- For EOS R5 and EOS R6
- Can Be Used in Place of LP-E6/N
Power select Canon cameras with the LP-E6NH rechargeable lithium-ion battery. This battery has the same form factor as the LP-E6/LP-E6N battery, and can be used as a higher capacity substitute for those batteries. The 2130mAh capacity should provide an improvement to battery life of approximately 14%. Additionally, it supports in-camera
GoPro Media Mod for HERO9/HERO10
₨30,000.00
Tiffen 58mm UV Protector Filter
₨6,800.00
Tiffen 77mm UV Protector Filter
₨5,000.00
Vivitar 55mm Variable NDX Filter
₨14,500.00
Reviews
There are no reviews yet.